|
| 1 |
What three switches are not supported when using winnt32.exe to upgrade from earlier versions of Windows NT? |
|
|
|
/f |
|
|
|
/c |
|
|
|
/l |
|
|
|
/s |
|
|
|
/x |
|
| 2 |
After completion of the Windows NT Server installation, what is the system default logon name? |
|
|
|
Administrator |
|
|
|
It is blank |
|
|
|
Supervisor |
|
|
|
Admin |
|
|
|
System |
|
| 3 |
What can be selected when upgrading from either Windows NT Workstation 3.51 or from Windows NT Server 3.51? |
|
|
|
Windows NT Server 4.0 member server |
|
|
|
Windows NT Server 4.0 Workstation |
|
|
|
Windows NT Server 4.0 PDC |
|
|
|
Windows NT Server 4.0 BDC |
|
|
|
|
|
| 4 |
Deployment of Windows NT Server differs from deployment of Windows NT Workstation in what three ways? |
|
|
|
The Licensing mode to be used |
|
|
|
Whether or not the server is to be a domain controller |
|
|
|
Installation of server-specific services |
|
|
|
Network installations using the WINNT or WINNT32 command |
|
|
|
The use of sysdiff to pre-install applications that do
not support a scripted installation |
|
| 5 |
When an application or service is to be installed during the installation process and it does not support scripted installation, what selection would you use? |
|
|
|
\$oem$\Oemfiles |
|
|
|
Sysdiff.exe |
|
|
|
Sysdiff.inf |
|
|
|
Windiff.exe |
|
|
|
|
|
| 6 |
On a x86 Based Computer, if the /b switch is used to setup Windows NT, where will the text mode initial parameter file be located? |
|
|
|
\$win_nt$.~ls\architecture directory |
|
|
|
It is placed on the second disk during installation |
|
|
|
\$win_nt$.~bt\Winnt.sif |
|
|
|
\systemroot\system32 directory |
|
|
|
|
|
| 7 |
What command and switch would you use to specify the location of Windows NT files during setup? |
|
|
|
Winnt.exe /l |
|
|
|
Winnt.exe /S |
|
|
|
Winnt32.exe /S |
|
|
|
Winnt32.exe /l |
|
|
|
|
|
| 8 |
Is the Power Users local group ever installed by default with Windows NT Server? |
|
|
|
Yes, when installed as a standalone server |
|
|
|
Yes, when installed as a backup domain controller |
|
|
|
Yes, when installed as a primary domain controller |
|
|
|
No, it is only used for Windows NT Workstation |
|
|
|
|
|
| 9 |
What switch is used with WINNT to create Windows NT boot disks only?
|
|
|
|
/b |
|
|
|
/ox |
|
|
|
/x |
|
|
|
/o |
|
|
|
|
|
| 10 |
Scenario: After installing a new network adapter on your Windows NT 4.0 Server computer, installed as a PDC, your transport protocol has issued an error message during network operations.
Requirement: Resolve the protocol error.
Primary Objective: Eliminate protocol errors on the PDC.
Secondary Objectives:
1. Check all binary-compatible NIC miniport drivers.
2. Check all workstations on the network for compatibility.
Proposed Solution: Use Event Viewer to check for problems in the NDIS layer. Check to see if your NIC is binary-compatible and will support NDIS 4.0. Insure that NDIS 4.0 drivers are properly installed and supported by the NIC and that any problem noted in Event Viewer is resolved. |
|
|
|
The proposed solution meets both the primary and all of
the secondary objectives |
|
|
|
The proposed solution meets the primary objective only |
|
|
|
The proposed solution meets the primary and one of the
secondary objectives |
|
|
|
The proposed solution does not meet the requirement |
|
|
|
|
|
| 11 |
What is the Windows NT 4.0 command for installing Windows NT 4.0 on a computer running Windows 95 that will allow a dual boot to either operating system? |
|
|
|
WIN95.SYS |
|
|
|
WINNT.SYS |
|
|
|
WINNT32.EXE |
|
|
|
WINNT.EXE |
|
|
|
SETUPNT.EXE |
|
| 12 |
What command can be used to perform an upgrade from within a Windows NT 3.1 Operating System? |
|
|
|
STARTUP |
|
|
|
SETUP |
|
|
|
WINNT |
|
|
|
WINNT32 |
|
|
|
WINNT35 |
|
| 13 |
To install and load Windows NT Server on an ARC-compliant system, you must have what type of partition? |
|
|
|
NTFS |
|
|
|
FAT |
|
|
|
HPFS |
|
|
|
FAT32 |
|
|
|
|
|
| 14 |
You are working on the PDC when it crashes. You require that seven users are given immediate access to domain resources. You add the seven users to the BDC. When will the seven users' accounts be permanently added to the domain? |
|
|
|
Immediately |
|
|
|
In 15 minutes |
|
|
|
Within 45 minutes |
|
|
|
Only after the BDC has been rebooted and it comes back
online |
|
|
|
Never |
|
| 15 |
You are working on a PDC when it crashes. Simultaneously, your supervisor requests that five user accounts be modified immediately so they can access critical files. What do you do? |
|
|
|
Add five temporary user accounts at the machine where the files are located |
|
|
|
Install new accounts on one of the BDCs |
|
|
|
Tell your boss to wait, since nothing can be done until
the PDC is back online |
|
|
|
Temporarily grant the Everyone group full access to the
files |
|
|
|
Promote a backup domain controller to the PDC and modify the appropriate accounts |
|
| 16 |
What is the default network protocol for Windows NT 4.0 on x86 platforms? |
|
|
|
NetBEUI |
|
|
|
IPX/SPX |
|
|
|
TCP/IP |
|
|
|
NWLink |
|
|
|
NetBEUI and IPX/SPX |
|
| 17 |
When setting up an ARC-Compliant computer (RISC-based), what does the executable SETUPLDR do? |
|
|
|
Prepares a 2MB FAT partition for NT system files |
|
|
|
Prepares a 2MB NTFS partition for NT system files |
|
|
|
Configures multi-boot capabilities for NT |
|
|
|
Starts the setup program |
|
|
|
Provides a layer of abstraction between NT and the
hardware |
|
| 18 |
Before prompting for a path in which to install Windows NT, Setup will search for what file? |
|
|
|
C:\NTLDR |
|
|
|
C:\NTDETECT |
|
|
|
C:\BOOT.INI |
|
|
|
C:\$LDR$ |
|
|
|
C:\CONFIG.SYS |
|
| 19 |
Upon completion of the Windows NT Server Installation, what three default users and groups have initial rights to logon locally at the Domain controller? |
|
|
|
Account operators |
|
|
|
Domain Administrators |
|
|
|
Backup operators |
|
|
|
Domain Users |
|
|
|
Guest |
|
| 20 |
What are three valid methods for installing Windows NT Server software on an MS-DOS based computer? |
|
|
|
Absorption |
|
|
|
CD-ROM |
|
|
|
Floppy disk |
|
|
|
Network |
|
|
|
Tape |
|
| 21 |
The process of upgrading from LAN Manager OS/2 to Windows NT requires running what migration utility? |
|
|
|
OS2BACK.EXE |
|
|
|
BACKUP.EXE |
|
|
|
PORTUAS.EXE |
|
|
|
ACLCONV.EXE |
|
|
|
BACKACC.EXE |
|
| 22 |
What is the requirement for a computer running Windows NT to join a domain? |
|
|
|
Any user on an existing Windows NT computer can join or
create a domain |
|
|
|
Any user installing Windows NT can join an existing
domain |
|
|
|
The Administrator account and password are required |
|
|
|
A computer account must be created or added to the domain database |
|
|
|
|
|
| 23 |
You are upgrading from Window NT 3.51 to 4.0. What is the command to run the Setup program with the floppyless installation option? |
|
|
|
WINNT32 /NOFLOP |
|
|
|
WINNT /B |
|
|
|
WINNT32 /FL |
|
|
|
WINNT /I |
|
|
|
WINNT32 /B |
|
| 24 |
What must be done before starting a server-based installation of Windows NT for an Intel-based computer? |
|
|
|
Use the Windows NT Explorer, with default settings, to
copy files from the I386 folder to a shared folder |
|
|
|
Use the Windows NT Explorer, with default settings, to
copy files from the MIPS folder to a shared folder |
|
|
|
A shared folder with all of the Alpha distribution files
must be made available |
|
|
|
A shared folder with all of the I386 distribution files
must be made available |
|
|
|
|
|
| 25 |
What client software is not provided on the Windows NT Server CD? |
|
|
|
Microsoft LAN Manager 2.2c for MS-DOS |
|
|
|
Microsoft Network Client 3.0 for MS-DOS |
|
|
|
Microsoft LAN Manager 2.2c for OS/2 |
|
|
|
Microsoft Windows NT Workstation 3.51 |
|
|
|
Microsoft Windows 95 |
|