Internetworking with MS TCP/IP : Test 1 (ver 1.3.00)

Click on the MOST correct answer


1	From his Windows NT computer, Bobby wants to view his university's course catalog which is stored on a UNIX computer. Which of the following could Bobby use?
		FTP using a HOSTS file
		LPQ using a HOSTS file
		Telnet using a DNS server
		Telnet using an LMHOSTS file
		Windows Explorer

2	HOSTS file entries are limited to how many characters?
		16
		255
		500
		There is no limit


3	What commands are required when using the LPR command on a Windows NT computer to send a print job to a remote host?
		The remote host name
		User name and password for the remote system
		Remote printer name
		The name of the file to be printed
		The remote system's SMB server name

4	Which SNMP operation is instituted by the agent instead of the management system?
		Set
		Trap
		Put
		Get


5	How can you configure WINS replication to occur at specified intervals?
		Use the AT command to schedule replication
		Edit the ReplIntrvl parameter in the registry
		Configure a WINS server to be a pull partner
		Configure a WINS server to be a push partner


6	You can register a non-WINS client with a WINS server by Choose the best answer:
		Modifying the scope to exclude the address
		Adding a static entry to the WINS database
		Creating a client reservation
		Manually editing the WINS cache


7	What must a router support in order to pass DHCP broadcasts?
		RFC 1543
		RFC 1544
		BOOTP Relay
		This cannot be done


8	Where does a client first look to resolve a NetBIOS name?
		Wins Server
		NetBIOS name cache
		HOSTS file
		LMHOSTS file


9	Which of the following items are required for a Telnet session? Choose all that apply:
		Host name
		Terminal type
		Service
		Port


10	What method does the RSH command use to authenticate the user?
		User name
		Password
		NT security
		.rhosts file


11	You are planning to add 30 subnets over the next 6 months. If you have a network ID of 130 and currently have 100 existing subnets, which is the best subnet ID to use?
		224
		240
		248
		254
		255

12	Where is the HOSTS file located?
		In
		In \binIn \bin
		In \system32
		In \system32\drivers\etc


13	When you ping the loopback address, a packet is sent ...
		On the network
		Down through the layers of the IP architecture and then up through the layers again
		Across the wire
		Through the loopback configuration utility


14	Which of the following files are case sensitive on NT 3.5 systems?
		HOSTS
		LMHOSTS
		ARP
		FQDN


15	Which of the following protocols work with SLIP? Choose all that apply:
		TCP/IP
		NetBEUI
		IPX/SPX
		PPTP


16	Which of the following protocols work with PPP? Choose all that apply:
		TCP/IP
		NetBEUI
		IPX/SPX
		PPTP


17	How many RAS sessions can Windows NT Workstation serve at one time?
		1
		2
		8
		255


18	What does the #PRE statement in an LMHOSTS file do? Choose one answer:
		Prepares a name to load into memory
		Preloads an entry into cache
		Permanently caches a preloaded file
		Identifies comment lines


19	What type of names are registered by WINS clients? Choose all that apply:
		The computer name
		The domain name of a domain controller
		Share names created on that computer
		The names of network services


20	Where can you see a record of WINS server error messages? Choose the best answer:
		In the ERROR.LOG file in the WINS directory
		The WINS Manager Event log
		In the Windows NT System Event Log
		In the Windows NT Application Event Log


21	What does SNMP stand for?
		System Network Monitoring Protocol
		Simple Network Monitoring Protocol
		System Network Management Protocol
		Simple Network Management Protocol


22	A good use for a multihomed host is to connect networks with dissimilar: Choose the best answer:
		Physical Topologies
		Network Cards
		Operating Systems
		Protocols


23	Which of the following is in charge of continually updating the browse list and managing the database of network servers on domains and workgroups?
		Backup Browser
		Master Browser
		Potential Browser
		None of the above


24	On a computer running Windows NT, where does TCP/IP display it's error messages?
		In the TCP/IP log file
		In the SNMP log file
		In the System log
		In the TCP.ERR file


25	TCP/IP is not working. You recall that when Windows NT first booted, the message "A Dependency Service Failed To Start" appeared. What is the most likely cause of the problem?
		The SNMP service is not installed
		The network card is not configured correctly
		The secondary WINS server is down
		The PDC of your domain is down